Payment & Shipping Terms:
|Type:||Induction Melting Furnace||Rated Power:||100kw|
|Rated Capacity:||0.1T||Voltage:||380v, 50/60HZ|
|MF Frequency:||2000HZ||Medium Voltage:||750v Phase|
|DC Voltage:||500V Phase||DC Current:||200A Phase|
|Melting Material:||Gold, Silver, Copper, Iron And Aluminum Etc||Control Cabinet Size:||1450*1000*850cm|
|Furnace Size:||1350*980*860cm||Control Cabinet Weight:||600kg|
Steel Scrap Melting Furnace,
Electric Industrial Scrap Melting Furnace,
100kg Scrap Metal Melting Furnace
100kg electric industrial metal gold steel scrap melting furnace
1. The induction furnace has advantage as follows:
1.high melting efficiency and good power saving, structure compact,strong over load ability,
2.the temperature surrounding the furnace is lower, dustless, good working environment.
3.easy operating process, melting safety,
4.Metal composition is uniform.
5.temperature increasing rapidly, furnace temperature controlled easily, high productivity efficiency.
6.high utilization rate, melting materials changes easily.
7. Turn on and turn off easily,and power save.
8. Adopt constant power to control the circuit, furnace can maintain constant power while melting and keep faster melting rate.
9. Set up over voltage, over current and water deficient protector, and run safely.
9. The motherboard of furnace adopts CAD technology, integrated circuit board, low-fault-rate, easy-manipulating,effortless maintenance.
10. Zero voltage starts up softly, high initial owner, no impact for the furnace electric network.
11. Apply to melting ferrous metal and non-ferrous metal like copper, aluminum, brass, steel,iron,stainless steel etc.
2. Technical Parameter of Large Induction Melting Equipment:
|Matching transformer's capacity||150KVA|
|Medium Voltage||750V Phase|
|DC Voltage||500V Phase|
|DC Current||200A Phase|
|Closed Loop Water Cooling Tower||LSN-10B|
3. Large Induction Melting Equipment Application:
Smelting and heating of non-ferrous metals such as cast copper, gold, silver, aluminium, aluminium alloy, iron, steel, stainless steel, ferrosilicon, ductile iron, etc.
Domain: Metallurgy, Machinery, Building Materials, Automotive Parts, etc.
4. Advantage of Large Induction Melting Equipment :
1.This furace offers permanent working power, and does not change its output power when the load changes, so it can economize on 10% electricity than other common equipments.
2. It is digitalized circuit, steady operation, reliable and low failure rate, because there is no complicated starting circuit or relay subsidiary loops in the main circuit
3. All-solid-state IGBT inverter and functional regulation, soft-switching dual resonant frequency control auto- tracking technology are fundamental assurance of high performance and high reliability.
4. It is small in size & light in weight, saving working space for our customers.
5. High efficiency & energy-saving, to keep high power factor and power efficiency when working.
6. Oscillation frequency from 1-20KHz, automatically tracking applicable frequency.
7. 100% full loading, 24 hours continuously work.
8. Constant output voltage, output power control all functions.
9. Frequency, power, voltage and current are all displayed.
Compared with other control modes, our constant power digital power supply has the following characteristics:
1). Effective interference suppression measures to the power grid, so that any electrical equipment in the power grid will not be affected. The function of impedance regulator can make the equipment always run in the best state;
2). Compared with the old-fashioned lines, the electricity-saving effect is obvious, and the electricity can be saved by about 10-20%;
3). The power factor can reach 0.94;
4). The success rate of starting the power supply can reach 100%;
5). The failure rate can be reduced by 90% due to the few connections, easy debugging and maintenance.
Contact Person: amy