Payment & Shipping Terms:
|Type:||Induction Melting Furnace||Power:||35kw|
|Input Current:||57A||Voltage:||3-phase 380v, 50/60hz|
|Oscillation Frequency:||1-15KHZ||Connecting Wire:||16mm2|
|Control Switch:||3*80A||Ground Wire:||2mm2|
|Cooling Water Pressure:||≥0.2MPa||Cooling Water Flow:||≥10L/Min|
medium frequency induction melting furnace,
electric metal melting furnace
1. Electric Induction Crucible Melting Furnace Feature :
1)MF induction melting machine can be used for the melting of steel, stainless steel, brass, aluminum, gold, silver and so on.
2)wide frequency range from 1KHZ to 20KHZ, working frequency can be designed by changing the coil and compensating capacitor according to the melting material, quantity, stirring effect desire, working noise, melting efficiency and other factors.
3)compared with SCR medium frequency induction melting machine, it can save energy at least 20% and up.
4)small and light, a lot of modes can be selected to melt different amount of metals. Not only it is suitable for the factory, but also suitable for the college and researching companies to use.
5)24hours non-stop melting ability.
6)it's easy to change induction melting machine for different capacity, different material, different way of pouring out, to suitable for all kinds of requirements.
2. Advantage of metal Induction Melting crucible Furnance:
1). Using a zero-voltage scanning soft-start mode, in any case may at any time to start or stop, will not have impact on power supply.
2). Fast smelting with low production cost; low-pollution and environment-friendly ;
3). A direct effect from the cold furnace melting. Dissolved material will be fully dumped clean. Molten material easy to replace.
4). Power adjustment flexibility. Be able to continuously smooth adjustment. Temperature uniformity can be easily controlled. Oxidation burning less. Metal components evenly.
5). Furnace shell using cast aluminum or steel structure, small footprint; furnace flip dump convenience, according to the need to use electric, manual, hydraulic tilting furnace and other means.
6). Designed to automatically adjust angle of inverter circuit that can automatically adjust the load impedance match, without adjustment of capacitance compensation and always run the equipment in good working condition; power supply system diagnostic error function, easy maintenance.
3. Melting Capacity of Electric Induction crucible Melting Furnace:
4. Company Brief Introduction :
Contact Person: amy