Advantages of induction heating VS traditional heating

Advantages of induction heating VS traditional heating

1.75% energy saving compared to traditional heating methods (gas machine high frequency electronic tube, gas furnace, electric furnace, coking coal); it is safe and there is no danger of high voltage electric shock, it can work continuously for 24 hours, without open flame, more in line with fire safety regulations;

2.Fast heating: the fastest heating speed is less than 1 second (speed control can be adjusted)

3.Wide heating application: can heat all kinds of metal parts (please replace the detachable induction coil according to the shape of the part)

4.Easy to install: connect the power supply, induction coil, and input and output tubes to use; small size, light weight, easy to use

5.Easy to operate - learn in minutes

6.Quick start: heating can start after energizing the water

7.Less power consumption: 70% energy saving than the old tube high frequency equipment, the smaller the workpiece, the lower the power consumption

8.Good effect: heating is very uniform (you can also adjust the density of the induction coil to make the workpiece parts reach the required temperature), the temperature rises rapidly, the oxide layer is less, and does not there is waste after annealing.

9.Adjustable power: stepless adjustment of output power

10.Full protection: with overvoltage, overcurrent, overheating, water shortage and other alarm indications, and automatic control and protection.

11.The temperature is controllable: the heating temperature of the workpiece is controlled by adjusting the heating time and infrared thermometer, so that the heating temperature can be controlled to a technical point. Also add insulation as needed

12.High security: Eliminates step-up transformer that generates close to 10,000 volts of high voltage