Points for Attention in Maintenance of Induction Heating Equipment

High-frequency heating furnaces need to periodically replace the cooling oil in the capacitors. Generally, they need to be replaced after summer.

The component connection points of induction heating equipment should be checked regularly, mainly to check whether there is any looseness. Due to the long-term operation of the wall digging foot current flowing through the equipment, there will be temperature changes, which may cause looseness when the thermal expansion and contraction alternate, and regular inspections are required.

Regularly clean the anode of the oscillating tube: the heat of the oscillating tube is that the anode loss is all cooled by the cooling water. During operation, the temperature of the anode surface is relatively high. Although the cooling water has certain water quality requirements, there will be certain impurities and induction After the heating equipment is operated for a long time, scale will be generated on the surface of the anode, which will affect the cooling effect of the cooling water on the anode. If the scale is not treated for a long time, if the scale is thicker, the cooling water effect will not be worse, and oscillation will occur. The tube anode heats up and melts and damages the accident.