50kw Electric Shaft Induction Quenching Machine High Frequency

50kw Electric high frequency Shaft Induction Quenching Machine

1. Induction Quenching Machine Brief Introduction :
1). IGBT inversion technology based LC series circuit.
2). Phase locking looping technology and soft switch ensure good reliability, realize power and frequency tracking automatically.
3). High energy conversion over 97.5%, energy saving 15%-30% compared with SCR technology.
4). Diode rectifier cause high power factor more than 0.95.
5). Easy to install and operate.
2. Technical Parameters of LSW-50 Induction Quenching Equipment:

3. Main characteristics of LSW-50 Induction Quenching Equipment:
(1) High efficiency: Metal can be heated to its desired temperature, even its melting point, instantly.
(2) Energy saving: The induction brazing machine adopts IGBT from Siemens & LC series circuit design, saving energy up to 15%-30%.
(3) Low cost: The heating time is short, compared to other heating methods, significantly reducing the amount of metal loss.
(4) Easy for installation: Following the user manual, even non-professional persons can install the induction brazing machine easily.
(5) Stable operation: complete protection, make customers have nothing to worry about.
(6) No harm to the environment: The induction brazing machine uses electricity, producing little waste gas and water.
4. Induction Quenching Equipment Application:


1.Heat treatment: Hardening, annealing, tempering of auto parts, motorcycles, hardware tools, bearings gears, sprockets, pneumatic, hydraulic accessories.
2.Hot forming: Diathermy of small workpiece, hot forging and hot rolling of twist drill.
3.Welding: The welding of turning/woodworking tools, drill bits, serrated blade, steel, copper wall, similar metal.
4.Other applications: The production of semiconductor single crystal, with hot, bottle sealing, sealing toothpaste, powder coating, metal embedded in plastic and so on.

 
5.Working Principle Of Induction Equipment Machine:
The flow of high-frequency and high-frequency machine is made of circular or other shape of the heating coil (usually with copper production). A coil which produces changes in the magnetic polarity of the instantaneous beam, the metal object is heated coil placed on the magnetic beam will be heated through the whole object, the object being heated inside the heating current in the opposite direction, there will corresponding large eddy currents. Because of the heated object memory in the resistance, it will have a lot of Joule heat, so that the rapid rise in body temperature itself. Metallic material is heated to achieve for all purposes.

KGPS Melting Furnace	LSZ Melting Furnace	Cooling Tower