Small medium frequency electric induction melting furnace for melting metal
1. Brief Introduction of Induction Melting Machine:
LSW series induction melting furnace adopts IGBT series and parallel induction heating technology as the core. Alternating current in the coils melts the metals in the crucible and then heats the hot metal to the temperature needed. It is the heat treatment prior to forging, sintering and hot rolling in casting and melting industries.
2. Technical Parameters of LSW-30 Induction Melting Machine:
| Model |
LSW-30 |
| Input Power |
30KW |
| Input Voltage |
3-phase 380v, 50/60hz |
| Voltage Range |
340V~420V |
| Oscillation Frequency |
25-40Khz |
| Current (max.) |
50A |
| Continuous Load Rate |
100% |
| Cooling Water Flow(controller) |
25L/Min. / 0.1mpa |
| Net Weight |
48kg |
| Dimension (L*W*H) |
690*290*600mm |
3. LSW-30 Induction Melting Machine Application:
(1) iron, pig iron, cast iron;
(2) steel, stainless steel, cast steel, carbon steel and bearing steel;
(3) precious metal such as gold, silver;
(4) copper, brass, bronze;
(5) aluminum, aluminum alloy;
(6) zinc, lead, tin, magnesium, nickel, titanium.
4. Main Features of induction heating Melting machine:
(1) High efficiency: Metal can be heated to its desired temperature, even its melting point, instantly.
(2) Energy saving: The induction heating machine adopts IGBT from & LC series circuit design, saving energy up to 15%-30%.
(3) Low cost: The heating time is short, compared to other heating methods, significantly reducing the amount of metal loss.
(4) Easy for installation: Following the user manual, even non-professional persons can install the induction heating machine easily.
(5) Stable operation: complete protection, make customers have nothing to worry about.
(6) No harm to the environment: The induction heating machine uses electricity, producing little waste gas and water.
5. LSW-30 Induction Heating Melting Machine Advantage:
(1) High efficiency: Induction power, heat transfers to the crucible in a short time.
(2) Energy saving: Compared with traditional melting ways (gas & oil), saving 20%~30% power.
(3) Easy and safe to use: All-round indicator lights controller, much safer and easier for workers to operate.
(4) Stable in use: Our products have been tested at every level, reducing the rate of failure to a great extent.
(5) Environmentally friendly: Electricity-powered, no air pollution, no dust and little noise.
(6) Easy to carry and install: Portable, saving much more room.
6. Related Products:
| KGPS Melting Furnace |
LSZ Melting Furnace |
Cooling Tower |
|
|
|
7. Certificates:
Your message must be between 20-3,000 characters!
