Auto Parts Hardening Induction Quenching Machine 300KW 480A

Auto Parts high frequency induction quenching heating equipment furnace

1. The basic principle of surface quenching::

Put the workpiece in the inductor made of hollow copper tube, and after passing the intermediate frequency or high frequency alternating current, an induced current of the same frequency is formed on the surface of the workpiece, and the surface of the part is rapidly heated (the temperature can be increased by 800~ 1000 degrees, the core is still close to room temperature), and then spray cooling (or oil immersion quenching) immediately to harden the surface layer of the workpiece.

2. Application of Induction Hardening Machine :
1. Various hardware tools, hand tools, such as pliers, wrenches, axes, hammers, axes, screwdrivers, scissors and other standard parts quenching.
2. Various automobile and motorcycle accessories, such as crankshaft, connecting rod, piston pin, sprocket wheel, aluminum
wheel, valve, rocker shaft, small circumference, fork and so on quenching.
3. Machine bed surface quenching.
4. All kinds of hardware quenching, machining. Such as shaft and gear, CAM, chuck, fixture and so on quenching.
5. Metal mold quenching, such as small mold, mold accessories, inner hole quenching, etc.

2.  Technical Parameter of High Frequency Induction Hardening Quenching Equipment:

3. Induction Quenching Hardening Equipment Application Cases:

4. Avantage of high frequency induction quenching equipment

1. Easy to use, simple to operate, and can be opened or stopped at any time. And do not need to warm up.
2. Manual operation, semi-automatic and full-automatic operation; Can be a long time to continue to work, can also be used that is to stop random use. It is beneficial to the use of the equipment in the low electricity price preferential period.
3. High energy utilization rate, environmental protection and energy saving, safe and reliable.

Induction heating treatment quenching furnace is widely used in industrial factory for hardening and induction heater coil shape can be customized per work piece size, such like steel flat, copper rod or aluminum bar.

1. High efficiency of conversion with IGBT (SIEMENS) technology; Energy saving 15%-30% compared to SCR/KGPS technology.
2. Much more efficient than gas-fired and coal-fired method.
3. 100% start-up success rate; power factor > 95%.
4. Perfect and complete protection functions, which increase the machine's reliability & stability.
5. There's no special foundations required, the operating cost is low, and the operation is easy.
6. Modular design, convenient to maintaining and repairing.