Heat Treatment 160KW Induction Quenching Machine Linear Optical Axis

160KW linear optical axis Induction Quenching Machine Heat Treatment

1. linear optical axis induction quenching machine:

Linear optical axes are widely used in many linear motion systems such as cylinder rods, automatic precision printers, automatic cutting machines and industrial robots. During the working process, the linear optical axis has to bear huge frictional force, and the wear and tear is relatively fast. For this reason, the linear optical axis is usually required to have high hardness, high wear resistance and long service life. In order to make the linear optical axis achieve the above properties, we use a high-frequency heating furnace for quenching heat treatment.

The high-frequency heating furnace is easy to use, simple to operate, can be turned on or off at any time, and does not require preheating. Using this equipment to quench and heat treatment the linear optical axis, the speed is very fast, and the required temperature can be reached in a very short time, avoiding the occurrence of oxidation and decarburization, ensuring the quenching quality, and making the surface of the linear optical axis after quenching. There is a thicker tough area under the hard layer, with better compressive internal stress, so that the fatigue resistance and breaking ability of the linear optical axis are higher, which meets the needs of work.

After quenching in a high-frequency heating furnace, the linear optical axis has no cracks and deformation defects, the effect is much better than that of traditional equipment, and the service life is greatly improved. What’s better is that the equipment adopts IGBT inverter power device, which is highly efficient and energy-saving, and the heating is easy to control. The heating current value and heating voltage value can be set, and the current, voltage, power and frequency are all displayed, and the operation is intuitive, simple and convenient.

2. Induction Quenching Hardening Machine Application:

1. Various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2. Various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Electric tools, such as gear and axes.
4. Machine tools, such as lathe deck and guide rail.
5. Various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
6. Hardware molds, such as small-size mold, mold accessory and inner hole of mold.
7. Other metal products.

3.  Technical Parameter of High Frequency Induction Hardening Quenching Machine:

4. Advantage of Introduction quenching machine:
1. Germany SIEMENS INFINEON IGBT Module. ( 40-60KHZ oscillation frequency, fast response time, superhigh stability, almost spatter-free welding )
2. Japan Nichicon electrolytic capacitor. ( filter capacitor )
3. Imported transistor integrated block.
4. All water pipe use thermostability, High pressure resistance best quality material.
5. Main card, signal circuit, drive circuit board,control circuit board and components are adopted:Toshiba, Hitachi,Motorola, China's top manufacturers.
6. International advanced all-solid-state semiconductor power devices.
7.Technical advantage:perfect control, alarm display circuit, getting full automatic tracking frequency, continuous adjustable power, safe dependable protection,clear and accuracy data display and etc.
8. Superiority Advantages: fast heating, wide application, small size, easy installation, simple operation, low power consumption, high efficiency.