Payment & Shipping Terms:
|Type:||Steel Melting Induction Furnace||Power:||70kw|
|Input Current:||110A||Voltage:||3-phase 380v, 50/60hz|
|Oscillation Frequency:||1-15KHZ||Connecting Wire:||50mm2|
|Control Switch:||3*150A||Ground Wire:||2mm2|
|Cooling Water Pressure:||≥0.2MPa||Cooling Water Flow:||≥15L/Min|
70kw Induction Melting Furnace,
25kg Induction Melting Furnace,
70kw induction furnace for steel melting
1. Feature of Electric Induction Melting Furnace:
Melting Furnace is the best choice for melting some of metals.It'll up to 1200 Degree Centigrade with 15-20 mins.It is widely used in the penetration heating occasions about metallurgy,petroleum,chemical,laboratory,heat-treatment,etc.
Ultra-small volume,light weight,portable,saving 10 times the production space for customers.
Simple to install, installation can be done by unprofessional staff very easily and quickly.
3.Easy and safe operation.
Easy and independent operation,safe and reliable. No high voltage, very safe for operating person.
4.Easy to change furnace crucible.
The crucible is a kind of spare parts.But it is very convenient and easy to change furnace crucible for different material melting. There are two kinds of crucibles as below.The price of high density graphite crucible is higher than clay graphite crucible.There is a very big difference.The dump type furnace always goes with clay graphite crucible.
5.Higher reliability and lower maintenance cost.
2. Main technical parameters of LSZ series induction melting furnace:
|Model||Power||Input current||Voltage||Oscillation frequency||
|LSZ-15||15kw||18A||3-phase 380 V, 50/60 Hz||1-15KHz||10mm2||3*40A|
3. Appliction of scrap metal induction melting furnace:
The scope of melting the metal is as below.
A.smelting for precious metals, such as gold, sliver, copper scrap melting;
B.smelting for iron, steel, copper, platinum, aluminum and other noble metals;
C.smelting for ferrous and non ferrous metals;
D.smelting for alloys;
E.smelting for metal rods;
F.other smelting work for metal product.
3. Electric Gold Aluminum Metal Induction Melting Furnace Feature:
1. Very easy to install and operate, Quickly study.
2. Ultra-small size, light weight, portable, occupies less than one square meter.
3. 24 hours uninterrupted smelting capacity.
4. Energy saving.
5. The furnace is to facilitate the replacement of different weights, different materials, different furnace way in order to accommodate each Kind smelting requirements.
6. The use of ultra-small frequency induction heating power supply frequency power, Its totally different from traditional furnace.
7. Heating through heat resistance, temperature uniformity.
8. The intermediate magnetic field on the molten metal with a magnetic stirring effect, and beneficial to ingredients are uniformly.
9. According to the recommended maximum smelting equipment and the amount of time each furnace smelting 20-60 minutes.
4. Related Products:
|Large Melting Furnce|
Contact Person: amy