0.35T Induction Melting Machine For Steel Iron Scrap Aluminum Copper

KGPS-0.35T induction melting furnace/machine for steel iron scrap aluminum copper

1. Brief Introduction of Medium Frequency Induction Melting Furnace:
KGPS series Medium Frequency melting induction furnace, aluminum shell mechanical tilt, is for melting cast steel, cast iron, stainless steel, copper, aluminum and other metals or its alloy.It is particularly suited to small and medium-size enterprises, or as Precision Casting Material Test.

Aluminum shell melting Furnace:
1. Aluminum shell furnace using more high quality aluminum alloy shell, reduce the intensity of the magnetic flux leakage at the same time to ensure furnace
2. USES the induction coil, the thick wall of full use standard T2 copper tube, can provide more energy and melting induction coil turn-to-turn open space to improve the efficiency of electricity;
3. Open hearth reduces the water vapor, and design cooling ring at the bottom, more prolong the service life of furnace lining;
4. Full use whole brick instead of ordinary asbestos, greatly reduces the use cost of furnace body.
2. Technical Parameter of Large Induction Melting Furnace:

3. Large Induction Melting Furnace Application:

(1) iron, pig iron, cast iron;

(2) steel, stainless steel, cast steel, carbon steel and bearing steel;

(3) gold, silver, platinum;

(4) copper, brass, bronze;

(5) aluminum, aluminum alloy;

(6) zinc, lead, tin, magnesium, nickel, titanium.

4. Advantage of Large Induction Melting Furnace :
1. Frequency-sweep zero voltage start, high success rate, no shock;
2. Automatic resistance adjustment, permanent power output, 10-20% energy saved in comparison with domestic traditional machine of the type;
3. Auto phase sequence adaptation, free of synchronization;
4. Good performance in reload staring, auto recovery;
5. Highly integrated in controlling circuit, free of use of high-rate starter and relay loop, fairly low failure rate;
6. Wholly digital design, strong in anti-interference, no temperature shift when in continuous working;
7. Multi-protection functions (for over current, over voltage, insufficient water pressure, power failure, or phase absence), and mishandling will not cause damage to machine.
5. Part of the melting furnace:
1). Furnace Parts: The mechanical parts of the MF furnace consisted of furnace pot,water power introduced into the system, titling device and other parts.
2). Furnace Ports: Furnace port including furnace shell, induction coil etc.
3). Furnace Shell:

Main Power Cabinet	Furnace Shell	Reducer	Water Cooled Cable	Crucible Mould	Induction Coil

6. Large Induction Melting Furnace Packaging:

As for packing of KGPS induction melting furnace:

wooden / plywood cases and the furnace is packed with wrapping film and the case is filled with foam,for waterproof and shockproof.

As for shipping of KGPS induction melting furnace:

1. If you have a shipper in China, we can send the machines to him or her for free.

2. If you want us to send the machines to you directly, we can send them to any main port of China promptly.
7. Customer Center: