Payment & Shipping Terms:
|Type:||Induction Brazing Machine||Voltage:||220V|
|Rated Duty Cycle:||90%||Dimension:||430*200*400mm|
Chuck Diamond Segment Induction Brazing Machine,
220V Induction Brazing Welding Machine,
Electric Induction Brazing Welding Machine
220V High frequency metal electric induction heating welding brazing machine
1. High Frequency Electric Induction Brazing Machine Brief Introduction :
The high-frequency welding of the chuck by the high-frequency induction heating power source. After welding, there is no crack at the welding place of the chuck, the welding surface is smooth, and there is no uneven deformation problem.
A chuck is a mechanical accessory used to clamp a workpiece on a machine tool. Generally speaking, its important components are the chuck body, the movable jaw and the jaw drive mechanism. It is generally installed on a lathe or a grinder, and moves through the movable jaws on the chuck body to clamp and position the workpiece for further processing.
The performance of the chuck requires anti-rust, high strength, high clamping precision, and large clamping force. Then, the welding process of the high-frequency induction heating power source can make the various parts of the chuck tightly combined to ensure that it can be used for long periods of time. It has the characteristics of high tensile strength, durability and reliability in the operation of time. The structure of this equipment is very simple, and the high-tech device assembly makes it have outstanding advantages such as low energy consumption, easy operation, ultra-safety, high stability and high intelligence. In particular, it can be used with quenching machine tools to improve the automation of machining, ensuring high output and high quality; in addition, it can accurately sense positioning, heating, quenching, cooling and other heat treatment processing can be easily done!
2. Technical Parameters of LSW-16 Induction Heating Machine:
|Working Voltage||220V, 50/60HZ|
|Max input power||16kw|
|Cooling water flow||20L/Min,0.15-0.2MPa|
|Dimension (L*W*H )||420*200*360mm|
|Usage||metal heating, brazing,melting etc|
3. Main characteristics of LSW-16 Induction Brazing Machine :
1.Under the same conditions, the effect of high-frequency power-saving double than traditional tubes.
2.Design with a 100% load, continuously 24 hours a day, can be equipped with infrared temperature measurement, automatic temperature control, improve the heating quality and simplify the manual operation.
3.With over-current, over-voltage, under-water, phase failure, load discomfort state, the provision of higher reliability and durability.
4. Induction Brazing Machine Application:
Heat treatment industry
1. a variety of steam, Motorcycle high-frequency hardening heat treatment, such as: crankshaft, connecting rod, piston pin, camshaft, valves, various gears within the gearbox, a variety of fork, all kinds of spline shaft, drive axle, various small shaft crank pin, a variety of rocker, rocker shaft, high-frequency hardening heat treatment.
2. the hardware high-frequency hardening heat treatment, such as pliers, hammers, strong pliers, wrenches.
3. hydraulic components such as: piston pump plunger, rotor pump rotor, conversion shaft of the valves, gear of gear pump high frequency quenching.
4. various electric tools gear shaft of the high-frequency hardening heat treatment.
5, a variety of carpentry tools, such as: axes, planing and other heat treatment.
1. plate heating, bending and forming.
2. standard parts, fasteners through the hot forming.
3. the hardware tools through heat, such as pliers, wrenches and other heat through hot forming.
4. taper shank drill rod extrusion prospecting.
5. the pipe through the hot forming, such as bends and so on.
1. carbide cutting tools welding. Such as turning, milling, cutter knife.
2. the diamond saw blade welding. Such as diamond saw blade, abrasive, jagged welding. Exploration drill bit used in welding, such as word drill, drill welding horns.
3. brass, copper
Steel,iron, non-ferrous metals,graphite crucible smelting
5. performance and characteristics of induction heating brazing machine:
1.Using imported Fuji power components and high-quality components to ensure high-quality equipment quality
2. Small body weight, high efficiency and energy saving
3. Overcurrent, overvoltage, under water, overheat protection circuit
4. Exquisite design, 304 stainless steel screws, 304 stainless steel handlebars, no paint stripping, stripping phenomenon.
Contact Person: amy