Sales & Support:
The smelting furnace adopts an intermediate frequency power supply of 200~2500Hz for induction heating, and the power range is 20~2500KW. According to its characteristics, it can also be called an intermediate frequency electric furnace. It is mainly used for smelting and heating precious metals ... Read More
|
1. The intermediate frequency smelting furnace should be used frequently and should not be left for a long time. It should be used for the first time after a long time of storage. It should be blown with a fan for 1 hour to eliminate moisture and clean the dust in the machine. . 2. Always pay ... Read More
|
1. The high-frequency welding machine can be used for welding metal pipe fittings, such as: copper pipe and copper pipe, copper pipe and steel pipe, steel pipe and steel pipe, steel pipe and iron pipe, copper pipe and iron pipe, iron pipe and iron pipe, copper pipe and The advantages of butt welding... Read More
|
1: Quenching can improve the hardness and wear resistance of metal workpieces, so it is widely used in various tools, molds, measuring tools and parts that require surface wear resistance (such as gears, rolls, carburized parts, etc.). 2: Through quenching and tempering at different temperatures, ... Read More
|
The purpose of quenching is to transform all or most of his organization into martensite to obtain high hardness. Gear quenching can increase the hardness of the workpiece and more wear resistance, can greatly improve the strength, toughness and fatigue strength of the metal, and the martensite ... Read More
|
One-to-two intermediate frequency furnace is a kind of intermediate frequency furnace. Its structure is that one power supply and two furnaces work at the same time. Insulation, heating, tempering, etc. are carried out at an accurate temperature to maximize production. Good starting characteristics, ... Read More
|
The one-to-two intermediate frequency furnace adopts the "series inverter type thyristor intermediate frequency power supply technology". Although the thyristor fully controlled rectifier electric furnace is used, it does not use it for voltage regulation. It only uses it to achieve soft start and ... Read More
|
1. Overcurrent: 1. Over-current at startup: The general reasons are: IGBT breakdown ‚Drive board failure ƒCaused by small balance magnetic ring ④Circuit board is wet ⑤Drive board power supply is not normal ⑥Inductor short circuit Treatment method: replace the driver board and IGBT, remove the small ... Read More
|
The intermediate frequency induction melting furnace uses induction heating to heat the metal work-piece itself. At the same time, the furnace body of the intermediate frequency induction smelting furnace is made of thermal insulation materials, so the heat loss is smaller. The non-contact heating ... Read More
|
the heating method of traditional heating machine is heating itself first,then conduct the temperature to the metal work-piece,so that the metal is melted under the high temperature.However the heat conduction will cause heat loss and causes the surrounding temperature rise. In total,the high ... Read More
|