Sales & Support：
Payment & Shipping Terms:
|Type:||Induction Melting Furnace||Power:||110kw|
|Input Current:||160A||Voltage:||3-phase 380v, 50/60hz|
|Oscillation Frequency:||1-15KHZ||Connecting Wire:||90mm2|
|Control Switch:||3*225A||Ground Wire:||2mm2|
|Cooling Water Pressure:||≥0.2MPa||Cooling Water Flow:||≥20L/Min|
IGBT Induction Scrap Melting Furnace,
15KHZ Scrap Melting Furnace,
110kw Copper Scrap Melting Furnace
1. Melting Capacity of Induction Melting Furnace:
2. Feature of Induction Melting Furnace:
1. High power, low frequency, good heat permeability
2. High efficiency, low power consumption, easy to operate and install.
3.24 hours of continuous work ability.
4. All-solid-state IGBT frequency conversion and function adjustment to achieve automatic frequency conversion tracking.
5. Over-current, over-Asian, overheated, water-deficient, lack of equal automatic protection functions to ensure equipment reliability.
6. Manually and automatically adjust to improve the heating quality of the workpiece and the repeatability and continuity of the heating.
3. Stainless Steel / Bronze Induction Melting Furnace Application:
1. medium frequency induction melting machines can be used for the melting of steel, stainless steel, brass, aluminium, gold, silver so on.
2. Because of the stirring effect which caused by the magnetic force, the melting pool can be stirred during the melting course to ease the floating of the flux oxides to produce high quality casting parts.
3. Wide frequency range from 1KHZ to 20KHZ, working frequency can be designed by changing the coil compensating capacitor according to the melting material, quantity, stirring effect desire, working noise, melting efficiency other factors.
4. Power efficiency is 20% higher than the SCR medium frequency machines;
5. Small light, a lot of models can be selected to melt different amount of metals. Not only is it suitable for the factory, but also suitable for the college researching companies to use.
There are four kinds of melting furnace as below.
1.smelting for precious metals, such as gold, sliver, copper scrap melting;
2.smelting for iron, steel, copper, platinum, aluminum and other noble metals;
3.smelting for ferrous and non ferrous metals;
4.smelting for alloys;
5.smelting for metal rods;
6.other smelting work for metal product.
4. Main technical parameters of LSZ series induction melting furnace:
|Model||Power||Input current||Voltage||Oscillation frequency||
|LSZ-15||15kw||18A||3-phase 380 V, 50/60 Hz||1-15KHz||10mm2||3*40A|
5. Stainless Steel / Bronze Induction Melting Furnace Feature:
1. 100% duty cycle , 24hours continuous working ability at maximum power.
2. High efficiency and energy saving:,a high power factor and power efficiency within the scope of full power.
3. With wide frequency range from 1-20KHZ automatic tracking ability, no need adjustment at scene.
4. Constant output voltage or power control modes are alternative;
5 Full display of output power, output frequency, output voltage and current.
6. simple operation: operate can be learned in a few minutes.
7. simple installation: connect the machine to 3phase 380VAC and cooling water only.
8. timer can be chosen to preset and adjusted the heating time, heating power, retaining time, retaining power respectively to control the heating curve and heating temperature.
6. Related Products:
|Large Melting Furnce|
Contact Person: amy