1. Brief Introduction of high frequency induction brazing machine:
Portable high frequency induction brazing machine has the advantages of small size, light weight, low failure rate, energy saving, and the welded joints are firm and beautiful. The geometry of the welded parts is not limited, the surface pattern will not be damaged, the internal crystal structure of the metal is unchanged, and the annealing range is small. Without obvious welding scars, it is widely used in the welding and annealing of heat treatment industry, water-cooled sanitary ware industry, hardware tool welding industry, electrical and electronic industry.
2. Application of induction brazing machine:
1.welding diamond saw blade, carbide saw blade welding and diamond cutting tools, grinding tools, drilling welding.
2. carbide cutting tools for machining welding. Such as turning, milling cutter welding.
3. mining tools, welding, such as "one" bits, pillar gear drill bits, dovetail coal drill bits, drill rods riveting, all kinds of shearer, a variety of shearer, boring machine pick a variety of welding.
4.The welding of various wood working tools, such as various woodworking planer, milling, and welding a variety of woodworking drill.
3. Induction Brazing Machine working principle :
Based on the principle of electromagnetic induction,our machine could make induced current generate inside the metal material,which is in the alternating magnetic field.Then this current could heat the material up to the melting state.
Our induction brazing machine model is suitable to used for the brazing of circular saw and other tools, usually 4 to 9 seconds is needed to braze one diamond blade.
4. Technical Parameters of LSW-30 Induction Brazing Machine:
Model | LSW-30 |
Working Voltage | 380V, 50/60HZ |
Max input power | 30kw |
Oscillation frequency | 25-40KHZ |
Duty cycle | 100% |
Cooling water flow | 25L/Min,0.15-0.2MPa |
Weight | 48kg |
Dimension (L*W*H ) | 690*290*600mm |
Material | stainless steel |
Color | support customized |
Usage | metal heating, brazing,melting etc |
5. Main characteristics of LSW-30 Induction Brazing Machine :
1.The equipment is easy to operate, there is no open flame when in use, and can be operated automatically.
2.No need to preheat, temperature can be adjusted at any time
3.Only the product itself generates heat and has less heat radiation to the surrounding environment.
4.Used for heating and rapid heating of workpieces with high repeatability.
5. Fast heating, uniform, which can effectively prevent zigzag caused by local overheating embrittlement and fracture, but also can prevent lack of penetration cause off the tooth and other bad phenomena;
6. Suitable for welding high performance, high hardness serrated saw blade.
7. Provide welding arts, installation simple and useful convenience.
8. Compared to thyristor medium frequency furnace, save energy 10-30%.
9. Can complete minimum and maximum head welding, all kinds of power, the frequency for your selection.
Contact Us at Any Time