PVC Infill Water Closed Circuit Cooling 380V Tower Square shape

Industrial Square Type Commercial Water Closed Circuit Cooling Tower

1. Advantage of closed circuit cooling tower:

Cooling medium is fully closed circulation in case that the debris into cooling system and to prevent the loss of cooling medium.
Soft water is not easy to scale, not blocking the pipeline.
Using cold water and spray water evaporation endothermic double cooling method with a high cooling efficiency.
The device has the advantages of small size, convenient movement and placement.
Using of automatic intelligent control, according to the requirements of the operating conditions automatically change the cooling mode.
Widely used, can directly cool the quenching liquid, oils, alcohols and other media that do not corrode the heat exchanger (copper tube), no loss of media, stable composition.

2. Brief Introduction of closed circuit cooling tower:

The primary use of cooling towers is to remove the heat absorbed in the circulating cooling water system used in power plants, petroleum refineries, petrochemical plants, natural gas processing plants, food processing plants, semi-conductor plants Etc… So Same Cooled Water Can Be Used Again… Which Saves Precious water …The smallest cooling towers are designed to handle water streams of only a few Liters of water per minute supplied in small pipes like those might see in a residence, while the largest cool hundreds of thousands of Liters per minute supplied in pipes as much as 15 feet (about 5 meters) in diameter on a large power plant.

A Cooling Tower is a heat exchange system that removes waste heat from a process system fluid, usually water.Cooling towers are used in both commercial and industrial applications.

3. Parts of Closed Type Cooling Tower:

• Coil: Made of high-quality seamless steel pipes. The coil unit are galvanized entirely to improve the corrosion resistance ability and extend the service time. The coils can also be made by SS-304/316L stainless steel or T2 red copper. Maximum pressure of our coils could reach to 32Mpa.
• Spray Pump: Sealed by top quality rotary no-limited machinery seal, no leaking, long lifecycle, small horse power, large flow volume, low noise and high performance.
• Fan: Aluminum alloy axis-flow type
• Casing: SS-304/316L or imported Aluminum-zinc alloy plate.
• Removable Drift Eliminator: PVC material; Make sure that the water loss rate will be less than 0.005%.
• Cooling Tower Fill: 100% Original Material PVC Infill, special design with great cooling effect.

4. Cooling Tower Package:

   1. the body is designed to 2 parts: upper body and bottom body, can be easily divided into two parts, and loaded into container;

   2. shipping with 20ft and 40ft container.

5.Related Products:

Induction Heating Machine	Induction Quenching Machine	Induction Brazing Machine	Large Melting Furnce